MIMAKI CF3-1610, Руководство по эксплуатации

Страница: 60 / 166

Moving the Head
2-4
Moving the Head Using the Jog Keys
Use this method for mounting tools or making a test cut or sample cut.
The following function allows the head to be accurately positioned using the jog keys.
• Changing the head travel speed (MAX , FAST , MIDDLE , LOW , AUTO).
The coordinates are displayed with respect to the command origin position.
1
Select the local menu.
• If the unit is in remote status, press to set
local status.
• Any page from page 1 to page 4 can be open.
2
Press a jog key once.
• The head move mode is selected. The light pointer
moves to the tool-tip position.
• The light pointer coordinates are displayed.
3
Press a jog key
to move the head.
• The destination coordinates are displayed.
To change the head travel speed : Press .
4
Press or .
• The tool tip moves to the light pointer position and the
display at Step 1 reappears.
<OR I G I N> [ mm ]
3 8 2 . 6 5 6 5 . 0
SPEED F AS T >
[ LOCA L ] 1 / 5
TOOL SE L ECT - - - >
COND I T I O N - - - >
T ES T CUT - - - >
<OR I G I N> [ mm ]
0 0 . 0 0 0 0 . 0 0
SPEED F AST >
<OR I G I N> [ mm ]
3 8 2 . 6 2 5 6 5 . 5 5
SPEED F AST >
[ LOCA L ] 1 / 5
TOOL SE L ECT - - - >
COND I T I ON - - - >
T ES T CUT - - - >