MIL'S PRO2XY, Инструкции по запуску и обслуживанию, Страница: 24 / 48

PRO
2
XY OXYGEN CONCENTRATOR
22 519211-22
EN
To respect the environment, this condensate should be treated before being sent to the drainage system.
(OWAMAT separator used to separate oil and water)
In compliance with:
Law No. 76-663 dated 19 July 1976 relating to installations classified for protecting the environment.
Law 92-3 dated 3 January 1992 concerning water.
Decree 93-742 dated 29/03/93 relating to the authorisation and declaration procedures provided for by Article 10 of
Law 92-3 dated 3 January 1992.
Decree 93-743 dated 29/03/93 relating to list of operations subject to authorisation and declaration in application of
Article 10 of Law 92-3 dated 3 January 1992 concerning water.
Order dated 1 March 1993 relating to the taking and consumption of water along with the discard of any nature of
installations classified for protecting the environment subject to authorisation.
Note: for the (optional) installation of an OWAMAT separator refer to the attached manual "instructions for OWAMAT
installation and servicing", and follow closely all recommendations.
10.2 O
2
concentrator pneumatic connections
Any parts to be in contact with O
2
should be completely degreased and suitable for use with O
2
Any sealing compound for use with these connectors should be checked as being suitable for O
2
10.2.1 Pneumatic connection PRO
2
XY - 5bar
For OX3 to OX16 models
Connect the outlet of each
homogenizer / receiver to the network
departure block (several concentrators)
or
to the network (only one
concentrator).
If several concentrators, connect the
outlet of the network departure block
to the network.
Connect the C2O network sensor to the PROCOM 2 electrical box (rilsan Ø6)
Outlet
PRO
2
XY