Page
32
of
33
Box and Dust Shield
Parts
Control Box
Dust Shield
AC Wire Extender
Hardware
Drop-in T Nut (4)
M5x12 Button Cap (2)
M5x8 Button Cap (2)
M6 Washer (2)
Tools
3mm Hex Key
Place (4) Drop-in t nuts in the top outside slot of the right 2650 frame extrusion near the front of the machine.
Using (2) M5x12 button caps with M6 washers, attach the box to the side of the machine using the first and
last drop in t nuts. The Red estop button on the box should be facing the front of the machine.
With the remaining t nuts, attach the dust shield to the rail, in between the box attachment point, using (2)
M5x8 button cap screws.
Plug the motor wires into the labeled AC
ports on the back of the box. Use the zip
ties provided to bundle the wires
appropriately. The 2550 motor wire will
need an extension (included).
