Page
15
of
33
Frame Top
Parts
2650 6060 Extrusion (2)
1465 6060 Extrusion (7)
Gusset (14)
Hardware
Inside Corner Joiner (28)
Corner Joiner Set Screw (56)
M5x8 Button Cap (56)
Drop-in T Nut (56)
Tools
3mm Hex Key
3/16 Hex Key
Square
Preload the set screws in the inside corner joiners. (2) Set screws for each
corner joiner. Screw them in from the inside of the v of the joiner. Make
sure the set screw is not sticking out the back (outside v) of the corner
joiner or they will not slide down the extrusion slots.
lat surface or table, lay out the (2) 2650 6060 extrusion with space for the
1465 extrusion between them. Take (1) 1465 extrusion and place (2) inside
corner joiners on each side of the extrusion (4 total for each 1465
extrusion). Make sure all corner joiners are on the same face of the
extrusion. The corner joiners will slide down the slot with one end in the
extrusion and stop at the edge of the extrusion with the other end. Make
sure the corner joiners stop at the edge of the 1465 extrusion. If they slide
down the slot, the orientation is wrong.
