Page
22
of
33
square. Locate the left Mega V Y rail and place it between the left Y end plates. The rack should be on the
outside of the rail with the teeth pointing out. Secure both ends with 5/16x3/4 button caps. Check Square.
Insert (2) drop-in t nuts on the left 2650 6060 extrusion. The drop-ins will
go on either side of the Y midspan support. Carefully push the t nuts to line
up with the holes on the Y midspan support and secure with (2) M5x25
button cap screws with M5 split lock washers. Repeat the process on the
right side of the machine.
Gantry to Rails
Parts
Assembled V-Wheel (4)
Completed Gantry
Hardware
V-Wheel Kit
•
Standard Spacer (4)
•
M8x40 Machine Screw (4)
•
M8 Nylock Nut (4)
Tools
13mm Wrench or Socket
Needle Nose Pliers
Phillips-Head Screwdriver
Place the Gantry onto the Y rails of the machine. The logo on the gantry should face the front of the machine
as pictured above.
