Page
29
of
33
Drag Chains
Parts
Long Drag Chain
Short Drag Chain
Drag Chain Mount (2)
Hardware
M4x12 Machine Screw (6)
M4 Nylock Nut (6)
Zip Ties
Tools
Philips Screwdriver
Flathead Screwdriver
Locate the short drag chain. Disconnect the last link on one side, flip the link over, and reattach the link to the
chain. Attach that end to the top of the drag chain bracket on the X motor mount with (2) M4x12 Machine
Screws and (2) M4 nylock nuts. Stretch out the drag chain and open all the gates on the back of the drag
chain. If the gates come off, just store them somewhere until needed.
The wires you will need to run through the X drag chain are:
Z Motor Wire
X Motor Wire
Router Power Cord
Z Homing Switch
