50
If you selected a loop, enter the loop number of the desired device and press the
Enter
button.
The report shows the loop number and device address in the following format:
Press the
UP
and
DOWN
cursor keys to scroll through all the devices on the loop for which the
report is available.
The first line identifies the AP device. The third and fourth lines are the analog values retrieved
from the sub-addresses in the device. For most devices, the usual value for the first number
on the second line is 50, which indicates that the device is in a normal state.
11. AP Group Param
This option reports on the output group configuration.
If the panel is connected to a printer, select an output source:
Select all loops or a specific loop.
If you selected a loop, enter the loop number of the desired device and press the
Enter
button.
The report shows the loop number and device address in the following format:
Press the
UP
and
DOWN
cursor keys to scroll through all the devices on the loop for which the
report is available.
The first line identifies the AP device, and the second line identifies the output group numbers
for every device. A device can be in four output groups. The value
0
does not indicate any
particular output group.
1 All
2 Loop
Loop Number
Loop :__
Loop 1 Addr. 107
50, 122, 121, 0
0, 0
- Report To -
1. Printer
2. Screen
1 All
2 Loop
Loop Number
Loop :__
Loop 1 Addr. 107
0, 0, 0, 0
