47
If the panel is connected to a printer, select an output source:
Select all loops or a specific loop.
Enter the loop number of the desired device and press the
Enter
button.
The maintenance report is shown in the following format.
The user can press
UP
and
DOWN
cursor key to scroll through all the devices on the loop for
which the maintenance report is available. If there are no dirty devices on the loop the
following message will be displayed
6. Current PWs
This option reports on the pulse width current levels of addressable devices.
If the panel is connected to a printer, select an output source:
Select all loops or a specific loop.
Enter the loop number of the desired device and press the
Enter
button.
The report shows the loop number and device address in the following format:
- Report To -
1. Printer
2. Screen
1 All
2 Loop
Loop Number
Loop :__
Maint Report
Percent dirty :012%
No dirty devices
found
- Report To -
1. Printer
2. Screen
1 All
2 Loop
Loop Number
Loop :__
Loop 1 Addr. 5
1: 300 2: 400 3: 604
4: 908 5: 604 ( 0)
