45
2. Event logs
The general event log report displays the contents of the general event log on the shared
display which contains the last 400 of any of the following events:
•
Activations of any input circuits.
•
Restoral of non-latching input circuits.
•
Pre-alarm on any device.
•
Initiation of the alarm verification sequence on a verified alarm input.
•
Any system troubles.
•
Activation of any system common control or any command on the command menu.
If the panel is connected to a printer, select an output source:
The report format is similar to the alarm log report. Pressing the
INFO
key shows additional
information about the log.
3. Current levels
The current levels report displays device information for each of all eligible devices on the
target loop (specified by user) or on all eligible devices on all loops if user specifies target loop
as '0'. Eligible devices will be those present in the configuration and also detected as present
on the real loops. Browsing through target address can be done using Up/Down keys. User
can indicate the device address to start with, but only if he indicated loop number as 1, 2, or 3.
Device information will consist of current analog values of the target and the percent of alarm if
device is an input. When the
Info
button is pressed the device type will be displayed together
with the alarm threshold if device is a smoke sensor.
If the panel is connected to a printer, select an output source:
Select all loops or a specific loop.
Enter the loop number of the desired device and press the
Enter
button.
The display shows the loop number, device address, current level and the percentage alarm in
the following format:
- Report To -
1. Printer
2. Screen
- Report To -
1. Printer
2. Screen
1 All
2 Loop
Loop Number
Loop :__
Loop 1 Addr. 2
Current level: 844
Percent Alarm: 1%
