MGG Gizmow T130, Руководство оператора

Страница: 17 / 96

Lawn Tractor Rear Discharge
17
1. Do not use the machine for any other purpose other than
the purpose of has been designed for (cutting and
collection of grass).
'RQRWWDPSHUZLWKRUUHPRYHWKHVDIHW\GHYLFHV´WWHG
to the machine.
3. Ensure you read the general safety regulations and pay
particular attention to driving and cutting on slopes
before using the machine;
a. Carefully read the instructions for use and
become familiar with the various controls, their
functions and on how to quickly stop the blades
and engine;
b. The rotating parts are extremely dangerous
therefore never put your hands or feet next to
these parts or beneath them and always keep
away from the discharge opening.
'ULYLQJXQGHUWKHLQµXHQFHRIPHGLFDWLRQVGUXJVRU
alcohol is EXTREMELY DANGEROUS as they serious
impact your concentration level. It is the user's
responsibility to assess the potential risk of the area
where work is to be carried out, as well as to take all the
necessary steps to ensure his own safety and that of
others, particularly on slopes or rough, slippery and
unstable ground.
5. NEVER leave the machine stopped on high grass with
the engine running. There is a potential risk of starting
D´UH
6. This machine must not be used on slopes greater than 10°.
7. For storage and transportation reasons, there are some
components which are not installed in the factory, but
have to be assembled after their removal from the
packing. Final assembly is carried out by following these
simple instructions. Use the correct tools as necessary to
ensure proper tightness
NOTE: It is necessary to carry out several checks and
operations before starting work to ensure that the work
gives the best results and is done in maximum safety.
1. It is important to have the correct tyre pressure as it is
the main condition for ensuring that the cutting deck is
horizontal and thus mows evenly.
7KHW\UHVRQ\RXUODZQWUDFWRUZHUHRYHULQµDWHGDWWKH
factory for shipping purposes. Correct tyre pressure is
important for best cutting performance.
3. Tyres with too much air pressure will cause the unit to
ride rough.
4. The incorrect air pressure will prevent the mower
housing from sitting level.
5HPRYHWKHKXEFDSVLI´WWHGXQVFUHZWKHYDOYHFDSV
and connect a compressed air line with a gauge to the
valves.
6. Adjust the tyre pressure
accordingly to the
VSHFL´FDWLRQVVKRZQEHORZ
The correct pressures are:
•
FRONT:
1.4 bar (tyres 15 x 6.00-6)
•
REAR:
1.0 bar (tyres 18 x 8.50-8)
Fuelling the engine
BEFORE STARTING
Checks and Precautions
Tyre Pressure
IMPORTANT: The operator is always
responsible for damage and injuries to
others.
WARNING: Before doing any assembly or
maintenance to the mower, remove the wire
from the spark plug.
Seat Adjustment
1. The seat can be adjusted by lifting the seat pan and
adjusting the 4 bolts underneath the seat.
2. This will allow you to slide the seat from rear to front.
NOTE: See the engine manufacturer’s instructions for
the type of fuel and oil to use. Before you use the unit,
read the information on safety, operation, maintenance,
and storage.
IMPORTANT: The machine is supplied
without engine oil or fuel. Before starting
XSWKHHQJLQH´OOZLWKRLODQGIXHOIROORZLQJ
the instructions given in the engine manual.
Oil Level
7KHFRPELQHGRLOUH´OOLQJFDSDQGWKHRLOVWLFNLV
accessible when the bonnet is lifted forwards. The oil
level in the engine should be checked before each run.
2. Make sure that the tractor is horizontal.
3. With the engine stopped, check its oil level. Follow
exactly the methods described in the engine manual,
this must be between the MIN and MAX marks on the
dipstick. (Fig 18)
4. Unscrew the oil stick and wipe clean. (Fig 19)
5. Replace the oil stick and screw tight. Remove again
and check the level.
Fig 17
Fig 19
Oil Stick
Fig 18
ADD FULL
CAUTION - DO