Metronix smartServo BL 4000-C Series Скачать руководство пользователя страница 13

Страница: 13 / 298

1 About this Product manual

About this Product manual

The purpose of this Product manual is to ensure the safe use of the servo drives of the
BL 4100-C series and of the Metronix ServoCommander

parameterisation software

(abbreviated "MSC") for servo drives of the BL 4100-C series.

The safety instructions and warnings in this Product manual must always be followed.

1.1

Explanations and notation

1.1.1

Structure of the warning notes

Warning notes have the following structure:

Signal word

Type of hazard

Measures to prevent the hazard

Signal words

Indicates an imminent hazard.

If the situation is not avoided, extremely serious and possibly fatal injuries will result.

Indicates a potentially hazardous situation.

If the situation is not avoided, extremely serious and possibly fatal injuries may result.

Indicates a potentially hazardous situation.

If the situation is not avoided, slight or minor injuries may result.

Warns against damage to property.

Warning signs as per ISO 7010

Warning sign

Explanation

Warning against fatal electric voltage.

Warning against hot surfaces.

Product manual BL 4000-C

Page 13 of 298

Содержание smartServo BL 4000-C Series











































































































































































































































































































Результаты поиска

Содержание smartServo BL 4000-C Series

Отзывы:

Metronix smartServo BL 4000-C Series, Руководство по эксплуатации продукта, Страница: 13 / 298

Результаты поиска

Содержание smartServo BL 4000-C Series

Отзывы: