FCM9002 USER MANUAL
76-02-095 Rev.B
Page 54 of 145
4.2.2.3 Routing Table
In order to operate within a routed network, and access hosts that are not located
on the same subnet, the routing table must be configured. The FCM9002
supports static routing only.
The routing table menu is as shown below:
Metrodata FCM9002 “FCM9002”
Alarms: Major
Destination Next Hop I/F Type
Prot. Age
Mask
---------------------------------------------------------------------
192.168.0.0 0.0.0.0
Mgmt direct local 12045 255.255.255.0
0.0.0.0
192.168.0.254 Mgmt indirect local 12046 0.0.0.0
A – add entry
D – delete entry
any other key to exit:
To add a new route you need to know three parameters,
Destination Network Address
Destination Network Mask
Next Hop Router Address
For example, the table above has the default route included where
Destination =
0.0.0.0
Mask
=
0.0.0.0
Next Hop
=
192.168.0.254
When DHCP is enabled, the default route will be added automatically if it is
supplied by the DHCP server.
4.2.2.4 Forwarding
The FCM9002 does not support routing between its ports, only switching and
therefore Forwarding is disabled.
