FCM9002 USER MANUAL
76-02-095 Rev.B
Page 19 of 145
1.3.1 EN55022 Statement
The FCM9002 is a Class A product. In a domestic environment, this product may
cause radio interference, in which case the user will be required to take adequate
measures.
1.3.2 FCC Declaration
This equipment has been tested and found to comply with the limits of the Class
A digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the Installation and Operation manual, may cause harmful
interference to the radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
1.4 WEEE Directive
The FCM9002 is covered by Directive 2002/96/EC ( OJ:L37/24/2003 ) on Waste
Electrical and Electronic Equipment ( WEEE ) Units must therefore not be
disposed of in standard landfill.
1.5 RoHS Compliance
The FCM9002 is compliant with the EU RoHS Directive 2002/95/EC. The RoHS
directive bans the use of six hazardous materials in products placed on the
market after July 1
st
2006. The six banned materials are Lead, Mercury,
Hexavalent Chromium, Polybrominated Biphenys, Polybrominated Diphenyl
Ethers and Cadmium.
The FCM9002 is manufactured using a lead free soldering process and as such
is fully RoHS 6/6 compliant.
