FCM9002 USER MANUAL
76-02-095 Rev.B
Page 139 of 145
4.7.2.4.6 Flows
The Flows menu item is used to assign flows to be tested. Flows may be
assigned using the comma, or range markers, eg
1
Test Flow 1
1,2
Test Flows 1 and 2
1-7
Test Flows 1 to 7
On initial installation, all defined flows should be tested to prove that the network
has been correctly provisioned to meet the SLA required for each service.
After initial installation, then only specific flows should be selected to be tested
whilst other flows pass traffic and are not affected.
When 2 or more flows are defined, the traffic generator will choose one of the
flows not currently being tested for background testing. For example, if flows 1
and 2 are selected for test, then when flow 1 is being verified, flow 2 will be used
for background traffic generation.
