Metro Therm SHK 200S, Инструкция по установке и эксплуатации

Страница: 53 / 80

53 SHK 200S
SHK 200S-6
Chapter 9 | Control
Symbol Description
Compressor (blocked)
Compressor (standard)
Reversing valves for hot water, cooling re -
spectively pool control.
The designations above the reversing valve
indicate where it is electrically connected
(EB101 = Slave 1, CL11 = Pool 1 etc.).
Hot water charging
Pool 1
Pool 2
Heating (heating the building, includes any
extra climate system)
Cooling
The working settings of the installed and activated ac-
cessories are entered in the submenu.
A detailed description of programming the accesso-
ries can be found in the instructions for the individual
accessories.
The additional equipment installed in the system is
defined here (See chapter "Accessories").
Connected accessories can be started in two ways.
You can select the options in the list or use the auto-
matic function "search installed acc".
Factory setting: hot water prod
search installed acc.
Select "search installed acc" and press OK to auto -
matically search for connected accessories for the
controller.
Menu 5.2.4 - accessories
Menu 5.3 - accessory settings
IMPORTANT
Menu 5.3 is inactive in the factory settings. In order for
this menu function to be active, it is necessary to install
an additional accessory and activate it in the accessories
menu. 5.2.4.
Menu 5.3.2 - shunt controlled add. heat
Menu 5.3.3 - extra climate system
Menu 5.3.6 - solar heating
IMPORTANT
Menu 5.3.2 is inactive in the factory settings. For this
menu function to be active, you must install the AXC 30
accessory and activate it in the accessories menu. 5.2.4.
IMPORTANT
Menu 5.3.3 is inactive in the factory settings. For this
menu function to be active, the ECS accessory must be
installed and activated in the accessories menu. 5.2.4.
IMPORTANT
Menu 5.3.6 is inactive in the factory settings. For this
menu function to be active, you must install the AXC 30
accessory and activate it in the accessories menu. 5.2.4.
Menu 5.3.11 - modbus
IMPORTANT
Menu 5.3.11 is inactive in the factory settings. In order for
this menu function to be active, it is necessary to install
the MODBUS accessory and activate it in the accesso -
ries menu. 5.2.4.
IMPORTANT
Menu 5.3.12 is inactive in the factory settings. For this
menu function to be active, the ERS accessory must be
installed and activated in the accessories menu. 5.2.4.
IMPORTANT
Menu 5.3.14 is inactive in the factory settings. For this
menu function to be active, the F135 accessory must be
installed and activated in the accessories menu 5.2.4.
A detailed description of programming the accesso-
ries can be found in the instructions for the individual
accessories.
A detailed description of programming the accesso-
ries can be found in the instructions for the individual
accessories.
A detailed description of programming the accesso-
ries can be found in the instructions for the individual
accessories.
A detailed description of programming the accesso-
ries can be found in the instructions for the individual
accessories.
A detailed description of programming the accesso-
ries can be found in the instructions for the individual
accessories.
A detailed description of programming the accesso-
ries can be found in the instructions for the individual
accessories.
Menu 5.3.12 - exhaust/supply air module
Menu 5.3.14 - F135