Metro Therm SHK 200S, Инструкция по установке и эксплуатации

Страница: 38 / 80

38 SHK 200S
SHK 200S-6
Start guide
The start guide appears when you first start the SHK
200S / SHK 200S-6. You can also enable the start
guide in menu 5.7. The individual settings for the start
guide factory settings are described below.
In this menu, select the language of the controller.
Factory setting: Polish
This menu displays information about the start guide.
In this menu you can activate and change settings for
the room sensor (accessory). More information after
selecting "?".
Factory setting: inactive
In this menu we have the possibility to change settings for
the cooling system. More information after selecting "
?".
Factory setting:
cool/heat sensor: none
Alarm roomsensor cooling: inactive
start active cooling: 60 DM
step difference compressors.: 30 DM
degree minutes cooling: -1 DM
In this menu we have the possibility to check the al-
lowed values for external sensors. More information
after selecting "?".
In this menu there is possibility to change settings for
the essential settings of the heating system. More in -
formation after selecting "?".
Factory setting: own settings
Factory setting: 10.0 dT at DOT
Factory setting: -20.0 DOT C
In this menu it is possible to activate additional con-
nected accessories. More information after selecting
"?".
Factory setting: hot water prod
1/18 Language
2/18 Information
5/18 Room sensor settings
6/18 Cooling
7/18 Control of external sensors
3/18 Flow. set. climate sys.
4/18 Accessories
Chapter 9 | Control
IMPORTANT
Settings of prod. hot tap water cannot be unchecked!
Unchecking will disable hot water heating.