Metro Therm SHK 200S, Инструкция по установке и эксплуатации

Страница: 44 / 80

44 SHK 200S
SHK 200S-6
Menu 2.2 - comfort mode
The function is activated immediately when a time pe-
riod is selected and confirmed using the OK button.
The remaining time for the selected setting is shown to
the right. When the time has run out controller returns
to the mode set in menu 2.2. Select “off" to switch off
temporary lux .
In this menu, we have the choice of operating modes
for different hot water temperatures. More information
after selecting "?".
Factory setting: economy
smart control
- The Smart control function is activat-
ed in this menu. This function remembers the hot wa-
ter consumption in the previous week and adjusts the
temperature in the hot water heater for the upcoming
week to ensure minimal energy consumption.
If the demand for hot water is greater, there is some
additional hot water available.
After activating the Intelligent Steering function, the
heater has a hot water heater offers the performance
given on the energy label.
economy - This mode gives less hot water than the
others, but is more economical. This mode can be
used in smaller households with a small hot water re-
quirement.
normal - Normal mode gives a larger amount of hot
water and is suitable for most households.
Menu 2.3 - scheduling
Here you can program the hot water temperature.
for two different time intervals throughout the day.
Scheduling is activated/deactivated by ticking/untick-
ing"activated". Set times are not affected at deactiva-
tion. More information after selecting "
?".
Factory setting:
off
Schedule: The schedule to be changed is selected
here.
Activated: Scheduling for the selected period is acti-
vated here. Set times are not affected at deactivation.
Day: Select which day or days of the week the sched-
ule is to apply to here. To remove the scheduling for a
particular day, the time for that day must be reset by
setting the start time to the same as the stop time. If
the line "all" is used, all days in the period are set for
these times.
Time period: The start and stop time for the selected
day for scheduling are selected here.
Adjusting: Set the hot water comfort that is to apply
during scheduling here.
Conflict: If two settings conflict with each other a red
exclamation mark is displayed.
luxury
- Lux mode gives the greatest possible amount
of hot water. In this mode the immersion heater may
be partially used to heat hot water, which may in-
crease operating costs.
Factory setting: off
ADVICE
If you wish to set similar scheduling for every day of
the week start by filling in “all” and then changing the
desired days.
CAUTION
If comfort mode "luxury" is selected in menu 2.2 no
further increase can be carried out.
Chapter 9 | Control