General Instructions
Function Generators
I - 5
General Instructions (contd.)
Symbols on the
instrument
Warning: potential hazard, refer to the operating guide.
Selective waste sorting for recycling electric and electronic waste. In
compliance with the WEEE 2002/96/EC directive:
the device should not be considered as household waste.
Earth terminal
Alternating signal
Indication of a key double function when pressed for more than 1
second
USB symbol
Guarantee
This equipment is guaranteed for all manufacturing and parts defects in
compliance with the general terms and conditions which are available on request
During the warranty period (3 years), the instrument may only be repaired by the
manufacturer who reserves the right to make the decision to either repair or
replace all or part of the appliance. In the event of a return of the equipment to
the manufacturer the shipping charge from the customer to the manufacturer is
at the customer’s expense.
The guarantee does not apply in the following conditions:
•
inappropriate use of the equipment or use with incompatible equipment
•
one or more changes made to the equipment without prior explicit
authorisation from the manufacturer’s technical department
•
an intervention is made on the instrument by a person not approved by the
manufacturer
•
the adapting to a specific application that is not part of the definition of the
instrument or in the operating guide
•
damage caused by a mechanical shock, by dropping the instrument or by
flooding.
Maintenance,
repairs, metrological
checks
The device includes no parts that can be replaced by the operator. All operations
must be carried out by competent approved personnel.
For checks and calibrations, contact one of our accredited metrology laboratories
(information and contact details available on request), at our Chauvin Arnoux
subsidiary or the branch in your country.
Cleaning
No interventions are authorised inside the instrument.
- Turn the instrument off (remove the power supply cable).
- Clean using a damp cloth and soap.
- Never use abrasive products or solvents.
- Dry quickly using a dry cloth or an air blower at max. 80° C.