
General Commands
Function Generators
IV - 27
General Commands (contd.)
Running the tests
(GX 310)
(GX 320)
Pressing the key triggers the automatic test or the selected test step.
The display shows:
in automatic mode (then scrolls through
the tests) or
in manual mode.
At the end of the run 2 situations are possible: the test was successful or the test
failed.
If the test succeeded the display shows:
in automatic mode or
in manual mode.
If the test failed the automatic test stops at the failed test step or switches to
manual mode. The display shows:
If the error persists contact your MANUMESURE representative (see p. 5).
Exiting AUTOTEST
Pressing this key exits Autotest mode.
The current test is stopped and the instrument switches to STANDBY, the key
becomes:
.