General commands
IV - 30
Function Generators
General Commands (contd.)
Clearing a
configuration
(GX 320)
Clearing a user configuration file (Set.01 to Set.15) consists in saving a null
configuration in the file.
This configuration is shown by displaying the file number only during file
selection.
Reloading a null configuration has no effect (the existing settings are kept
active).
It is not necessary to clear a file before saving a configuration since
saving the configuration overwrites the data in the file.
Enters configuration mode.
is displayed with the current file number:
if file 3 is empty
if file 3 already contains a configuration
the data (except frequency) is displayed on the screen.
Pressing a key other than
or
exits the mode without making any
changes.
Selects file erase mode.
is added to the display:
Pressing the key again unselects the file erase mode.
Selects a file from SEt.01 to SEt.15. The screen is updated with the data from
the selected file.
Pressing the key again saves a null configuration in the selected file and returns
to the current configuration display.
and
are cleared from the screen.