Metal-Fach Z562 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 52

Metal-Fach Z562 Скачать руководство пользователя страница 52

Since Metal-Fach Sp. z o.o. is continuously improving its products and adapting its
commercial offer to fit the customers’ needs, we reserve the right to modify our
products without prior notice. Therefore, we advise contacting an authorised dealer
or sales representative of Metal-Fach Sp. z o.o., prior to making your decision about
purchase. Metal-Fach Sp. z o.o. will not accept any complaints, regarding the data
and pictures contained in the catalogue, as the presented offer shall not constitute
an offer, within the meaning of the provisions of the Civil Code.

The pictures do not necessarily show standard accessories.

Original spare parts are available from authorised dealers, both in Poland and
abroad, and also at the Metal-Fach retail outlet.

SERVICE

16-100 Sokółka, ul. Kresowa 62
Tel.: +48 85 711 07 80; Fax: +48 85 711 07 93
[email protected]

SALES
16-100 Sokółka, ul. Kresowa 62
Tel.: +48 85 711 07 78; Fax: +48 85 711 07 89
[email protected]

SPARE-PARTS WHOLESALE STORE

16-100 Sokółka, ul. Kresowa 62

WHOLESALE
Tel.: +48 85 711 07 80; Fax: +48 85 711 07 93
[email protected]

RETAIL SALES
Tel.: +48 85 711 07 80; Fax: +48 85 711 07 93
[email protected]

CURRENT INFORMATION ABOUT OUR PRODUCTS CAN BE FOUND ON WWW.METALFACH.COM.PL

«
...
50
51
52

Содержание Z562





















































Отзывы:

Нет отзывов