Metal-Fach Z562, Инструкция по эксплуатации, Страница: 16 / 52

16
INSTRUCTION MANUAL
– BALER Z562
3.8 Windrow Collection
3.8.1 The Principles Of Operation
The baler collects the material from the fields by means of a hydraulically raised pick-
up. The picked-up material is pressed and rolled into cylindrical rolls, and then it is bound with
twine or net, and finally tossed out of the rolling chamber, as shown in the Figure below.
Figure 25. Forming bales
3.8.2 Operations Description
The picked-up material is fed into the rolling chamber, where the rolling rollers move to
compact and roll it into a pressed roll. The ending of the rolling action is signalled by the
compaction-degree indicator A (Section 4.6.) reaching the lower position of the yellow field and
generating the acoustic signal.
When the acoustic signal is off, the bale is bound with a twine (twine-binding is
automatic. Net binding requires control-panel use). At that moment you must stop the tractor
(do not switch the engine off) without pausing the PTOff operation. The end of the twine is
gripped between the revolving bale and the revolving press roller. The bale twine-binding
indicator B moves towards the belt wheel (sequence 1 in Figure 26), and then it moves to the
end position on the opposite side (sequence 2) and it returns to the original position (sequence
3).
Figure 26. The bale twine-binding indicator