Metal-Fach Z562, Инструкция по эксплуатации, Страница: 40 / 52

40
INSTRUCTION MANUAL
– BALER Z562
4.17.2 The Automatic Lubrication System For Chains
The Z562 baler can be fitted with an integrated lubrication system of main-drive chains.
The standard equipment of the machine allows the user to install the central lubrication system
at a later date. The installation is to be performed at the authorised service centre or by the
user.
The system is composed of a mechanical pump, an oil tank with a volume of 3 l,
manifolds, and dosing ends terminated with brushes feeding oil to the main lubrication points,
providing uniform distribution of oil on the chain surface.
The pump (P) provides a stepless adjustment of the amount of oil. To adjust the amount
of oil, loosen the nuts (N) on the cam (K) and turn part of the cam so that the arrow (W) indicates
the required number from 1 to 8, where 1 means the lowest oil amount, and 8 the highest.
Figure 53. Adjusting the oil amount in the automatic lubrication system
Lubricate the pick-up rollers with grease after each 24 hours of baler use
or after baling 250 bales.
WARNING!
Using the mechanical pump without oil is prohibited. Operating a“dry”
mechanical pump is a risk of its being damaged.
WARNING