Metal-Fach Z562, Инструкция по эксплуатации, Страница: 33 / 52

INSTRUCTION MANUAL
– BALER Z562
33
4.15 Sharpening The Blades
It is necessary to sharpen the blades after some time of use in the baler fitted with the
feeder roller and cutting blades (optional accessory). Assess the condition of the blades after
lifting them and setting in the working position. For this purpose, couple the baler with the
tractor and extend the blades with the use of the tractor hydraulic-system control lever (Section
3.6.). Stop the tractor engine, take the key from the ignition, and engage the tractor auxiliary
brake. Assess the blades condition. Blunt blades must be sharpened.
You can sharpen the blades yourself, if you use special care. Before you start
sharpening the blades, couple the baler with the tractor and retract the blades with the use of
the tractor hydraulic-system control lever (Section 3.6.). Detach the baler from the tractor. Secure
the baler wheels with chocks. Loosen the locking screw and lower the lock lever (Figure 45).
The manufacturer recommends having the cutter blades sharpened by a
specialist.
WARNING!
Improper lock setting and unsecured adjustment screw (1) can cause
damage to the baler.
WARNING