Metal-Fach Z562, Инструкция по эксплуатации, Страница: 18 / 52

18
INSTRUCTION MANUAL
– BALER Z562
3.8.3 Straw Collection
Figure 28. Straw collection - machine preparation
Prepare the machine for straw collection by doing the following.
•
Run the cord through holes 4 or 5 of the lever (Figure 38)
•
The manufacture
’s recommended maximum cord tension should be 20 mm, as
shown in Figure 28
•
Install the drawbar by means of adjusting hole No. 2 (Section 3.2.1.); as standard,
hole No. 3 is used
•
Dismantle the clamp, unit 14 (Figure 4).
3.9 Removing The Accumulated Material
During material pick-up, it is possible that it will accumulate on the pick-up and rotor or
collector. Clogging is the result of improperly adjusting the speed to the harvest conditions,
and improperly formed windrow.
DANGER!
Removing accumulated material during the machine operation is
forbidden.
DANGER
DANGER!
Use special care during the removal of the accumulated material, as the
rotor zone is dangerous due to sharp blades.
DANGER