Mercury Sable 2008, Руководство пользователя

Страница: 124 / 328

Smart locks
This feature helps to prevent you from locking yourself out of the vehicle
if your key is still in the ignition.
When you open one of the front doors and you lock the vehicle with the
power door lock control (on the driver or passenger door trim panel), all
the doors will lock, then all doors will automatically unlock reminding
you that your key is still in the ignition.
The vehicle can still be locked, with the key in the ignition, by locking
the driver’s door with a key, using the lock control on the remote entry
transmitter portion of your Integrated Keyhead Transmitter, or locking
the vehicle with the keyless entry keypad.
If both front doors are closed, the vehicle can be locked from any
method, regardless of whether the key is in the ignition or not.
Autolock feature
The autolock feature will lock all the doors when:
•
all the doors are closed,
•
the ignition is in the 3 (RUN) position,
•
you shift into any gear putting the vehicle in motion, and
•
the vehicle attains a speed greater than 12 mph (20 km/h) for greater
than 2 seconds.
The autolock feature repeats when:
•
any door is opened then closed while the ignition is in the 3 (RUN)
position and the vehicle speed is 9 mph (15 km/h) or lower, and
•
the vehicle then attains a speed greater than 12 mph (20 km/h) for
greater than 2 seconds.
Deactivating/activating autolock feature
Your vehicle comes with the autolock features activated; there are four
methods to enable/disable this feature:
•
Through your authorized dealer,
•
by using a power door unlock/lock procedure,
•
using a keypad procedure, or
•
or by using the instrument cluster message center. Refer to Message
center in the Driver Controls chapter.
Note:
The autolock feature can be activated/deactivated independently
of the autounlock feature.
2008 Sable (mgo)
Owners Guide (post-2002-fmt)
USA
(fus)
Locks and Security
124