Mercury Racing HP525 EFI Bravo Sterndrive Series, Инструкция по эксплуатации, техническому обслуживанию и гарантии

Страница: 71 / 147

MAINTENANCE
eng
61
Replacement Service Parts
!
WARNING
Avoid fire or explosion hazard. Electrical, ignition, and fuel
system components on Mercury Marine products comply with
federal and international standards to minimize risk of fire or
explosion. Do not use replacement electrical or fuel system
components that do not comply with these standards. When
servicing the electrical and fuel systems, properly install and
tighten all components.
Marine engines are expected to operate at or near full throttle for
most of their life. They are also expected to operate in fresh and
saltwater environments. These conditions require numerous
special parts. Care should be exercised when replacing marine
engine parts, as specifications are quite different from those of
the standard automotive engine.
For example, one of the most important, and probably the least
suspected special replacement part, is the cylinder head gasket.
Since saltwater is highly corrosive, the steel‑type automotive
head gasket cannot be used. A marine engine head gasket uses
special materials to resist corrosive action.
Since marine engines must be capable of running at or near
maximum RPM much of the time, special valve springs, valve
lifters, pistons, bearings, camshafts and other heavy‑duty moving
parts are required for long life and peak performance.
These are but a few of the many special modifications that are
required in Mercury Marine engines to provide long life and
dependable performance.
Do‑It‑Yourself Maintenance Suggestions
If you are one of those persons who likes to do‑it‑yourself, here
are some suggestions for you.