Mercedes-Benz V 200 d, Руководство по эксплуатации

Страница: 355 / 404

Always switch off the windscreen wipers and
the ignition before cleaning the windscreen or
wiper blades.
!
Do not fold the windscreen wipers away
from the windscreen unless the bonnet is
closed. Otherwise, you could damage the
bonnet.
! Do not pull on the wiper blade. Otherwise,
the wiper blade could be damaged.
! Do not clean wiper blades too often and do
not rub them too hard. Otherwise, the graph-
ite coating could be damaged. This could
cause wiper noise.
! Hold the wiper arm securely when folding
back. The windscreen could be damaged if
the wiper arm hits against it suddenly.
X Turn the key to position 0 in the ignition lock
or remove the key.
X
Fold the wiper arms away from the wind-
screen until you feel them engage.
X
Carefully clean the wiper blades with a damp
cloth.
X
Fold back the wiper arms before switching on
the ignition.
Cleaning the exterior lighting
!
Only use cleaning agents or cleaning cloths
that are suitable for plastic lenses. Unsuitable
cleaning agents or cleaning cloths could
scratch or damage the plastic lenses of the
exterior lighting.
X
Clean the plastic covers of the exterior light-
ing with a damp sponge and a mild cleaning
agent, e.g. Mercedes-Benz car shampoo, or
with cleaning cloths.
Cleaning the mirror turn signal
! Only use cleaning agents or cleaning cloths
that are suitable for plastic lenses. Unsuitable
cleaning agents or cleaning cloths could
scratch or damage the plastic lenses of the
mirror turn signals.
X
Clean the plastic lenses of the mirror turn sig-
nals in the exterior mirror housing using a wet
sponge and a mild cleaning agent, e.g.
Mercedes-Benz car shampoo, or by using
cleaning cloths.
Cleaning the sensors
! Do not use dry, coarse or hard cloths and do
not scrub. You will otherwise scratch or dam-
age the sensors.
If you clean the sensors with a high-pressure
cleaner or steam cleaner, observe the infor-
mation provided by the manufacturer regard-
ing the distance to be maintained between
the vehicle and the nozzle of the high-pres-
sure cleaner.
X
Clean drive system sensors
:
with water, car
shampoo and a soft cloth.
Cleaning the reversing camera
! Do not use dry, coarse or hard cloths and do
not scrub. You could otherwise scratch or
damage the lens of the reversing camera.
When cleaning the vehicle with a high-pres-
sure or steam cleaner, observe a minimum
distance of 50 cm to the reversing camera. Do
not aim directly at the reversing camera. You
could otherwise damage the reversing cam-
era.
The camera lens is next to the tailgate handle.
If the camera flap is open, make sure that you do
not apply any wax to the camera lens when wax-
ing the vehicle. If necessary, remove the wax
using water, shampoo and a soft cloth.
X
Make sure that the engine is switched off and
the key is in position 2 in the ignition lock.
X
Make sure that the Activation by R gear
function is selected in the Rear view camera
Care
353
Maintenance and care
Z