positioning of the AdBlue
®
filler cap when
doing so (
Y
page 187).
When you subsequently switch on the igni-
tion, the
Refill AdBlue See Owner’s
Manual
display message must go out after
approximately 20 seconds. If the message
continues to be displayed, you must add more
AdBlue
®
.
Filling procedure with the AdBlue
®
refill
canister
!
Surfaces which have come into contact with
AdBlue
®
while refilling should be rinsed
immediately with water, or remove AdBlue
®
with a moist cloth and cold water. If AdBlue
®
has already crystallised, use a sponge and
cold water to clean the area. AdBlue
®
residue
crystallises after a certain amount of time and
soils the affected surfaces.
AdBlue
®
refill canisters are available at many
filling stations or at a Mercedes-Benz Service
Centre. AdBlue
®
refill canisters are often sold
with a filler hose. A filler hose that does not
exactly fit the vehicle's AdBlue
®
tank offers no
protection against overfilling. AdBlue
®
may leak
out as a result of overfilling. AdBlue
®
is available
in a variety of containers and receptacles.
X
Unscrew the cap of the AdBlue
®
refill canis-
ter.
X
Screw the refill hose onto the AdBlue
®
refill
canister until hand-tight.
X
Unscrew the blue AdBlue
®
filler cap
(
Y
page 187).
X
Insert the refill hose into the filler neck and fill
up with AdBlue
®
.
When doing so, do not overfill the AdBlue
®
tank. If any AdBlue
®
overflows, do not con-
tinue filling the tank.
X
Screw on the AdBlue
®
filler cap and close the
fuel filler flap. Pay attention to the correct
positioning of the AdBlue
®
filler cap when
doing so (
Y
page 187).
X
Unscrew the filler hose of the AdBlue
®
refill
canister.
X
Reseal the AdBlue
®
refill canister with the
cap.
X
Store the partially empty AdBlue
®
refill can-
ister and refill hose or dispose of the empty
AdBlue
®
refill canister and refill hose in an
environmentally-responsible manner.
When you subsequently switch on the igni-
tion, the
Refill AdBlue See Owner’s
Manual
display message must go out after
approximately 20 seconds. If the message
continues to be displayed, you must add more
AdBlue
®
.
Filling procedure with AdBlue
®
refill
bottle
!
Surfaces which have come into contact with
AdBlue
®
while refilling should be rinsed
immediately with water, or remove AdBlue
®
with a moist cloth and cold water. If AdBlue
®
has already crystallised, use a sponge and
cold water to clean the area. AdBlue
®
residue
crystallises after a certain amount of time and
soils the affected surfaces.
!
Only screw on the AdBlue
®
refill bottle so
that it is hand-tight. Otherwise, the thread of
the AdBlue
®
refill bottle could be damaged
and AdBlue
®
could leak out.
AdBlue
®
refill bottles are available at many fill-
ing stations or at a Mercedes-Benz Service
Centre. Refill bottles without a threaded seal
offer no protection against overfilling. AdBlue
®
may leak out as a result of overfilling. Mercedes
Benz offers special refill bottles with a threaded
seal. These are available from a Mercedes-Benz
Service Centre.
X
Unscrew the blue AdBlue
®
filler cap
(
Y
page 187).
X
Unscrew the cap of AdBlue
®
refill bottle
:
.
X
Place AdBlue
®
refill bottle
:
on the filler
neck as shown and screw it on clockwise until
hand-tight.
188
Refuelling
Driving and parking
Содержание V 200 d
