Mercedes-Benz V 200 d, Руководство по эксплуатации

Страница: 167 / 404

R
set the operating duration
Ñ
between 10
and 120 minutes or to continuous operation
à
(
Y
page 165)
R
set the heating level (preselected tempera-
ture)
ß
to a range between 10 and 30
(
Y
page 166)
Activating the timer
The timer switches to standby mode after
10 seconds. The display goes off.
X
Press and hold the
Ü
button until the
menu bar appears in the display and the time
is shown.
Setting the day, time and operating dura-
tion
You must reset the day, time, and default value
for the operating duration:
R
during initial operation
R
after a voltage supply interruption (e.g. if the
battery has been disconnected)
R
after a malfunction.
You can find further information on malfunc-
tions in the "Problems with the auxiliary heating"
section (
Y
page 167).
X
Press the
Û
or
â
button until the
Ñ
symbol in menu bar
;
flashes.
X
Press the
b
button.
In program column
:
, the day selected
flashes.
X
Press the
Û
or
â
button to set the
desired day.
X
Press the
b
button.
The day selected is stored. The hour setting of
the clock flashes.
X
In the same way, set the hour and subse-
quently the minutes, then confirm by pressing
the
b
button.
The time is stored. Program column
:
dis-
appears and the operating duration flashes.
The operating duration set is the default set-
ting for immediate heating mode. You can set
the operating duration from 10 to
120 minutes or activate continuous opera-
tion.
X Using the
Û
or
â
button, set the
minute value or select the
à
symbol for
continuous operation.
X Press the
b
button.
The operating duration is stored. The time is
shown.
Activating/deactivating immediate heat-
ing mode (heater booster function)
X
To switch on: press the
Û
or
â
button
until the
y
symbol in the menu bar flashes.
X
Press the
b
button.
The operation duration flashes in the display.
i You can preset the default value that is
shown (
Y
page 165).
X
Using the
Û
or
â
button, set the
minute value (10 to 120) or select the
à
symbol for continuous operation.
X
Press the
b
button.
Immediate heating mode (heater booster
function) is activated. The time and the
y
symbol appear.
X
To switch off: press the
Û
or
â
button
until the
y
symbol flashes in the menu bar,
and then press the
b
button.
Immediate heating mode (heater booster
function) is deactivated. The
y
symbol
disappears.
The auxiliary heating operates for another
2 minutes and then switches off automati-
cally.
i If you switch off the ignition while immediate
heating mode (operating duration between
10 to 120 minutes) is active, immediate heat-
ing mode is also switched off. The auxiliary
heating operates for another two minutes and
then switches off automatically.
If you have set continuous operation as the
operating duration and you switch off the igni-
tion, the auxiliary heating switches off auto-
matically after about 15 minutes. If, in the
remaining time, the ignition is switched on
again, continuous operation of the auxiliary
heating continues.
Setting a departure time
You can set three preselection times using the
timer.
Make sure that the time and date set on the
timer are correct before setting the departure
time (
Y
page 165). Otherwise, the auxiliary heat-
ing may switch on at the wrong time and at an
unsuitable location. When setting the departure
time, also observe the important safety notes on
operating the auxiliary heating (
Y
page 157).
Once the departure time is activated, the auxil-
iary heating system starts up automatically and
runs for the operating duration set prior to
departure.
Operating the auxiliary heating system
165
Climate control
Z