Mercedes-Benz V 200 d, Руководство по эксплуатации

Страница: 325 / 404

Using the 230 V power socket
X
To switch on: turn the key to position 2 in the
ignition lock (
Y
page 172).
X
Pull down the cover.
X
Open flap
=
.
X
Insert the electronic device connector into
230 V power socket
:
.
Indicator lamp
;
lights up.
X
To switch off: remove the connector from
230 V power socket
:
.
Make sure that you do not pull on the cable.
Problems with the 230 V power socket
Problem
Possible causes/consequences and
M
Solutions
The indicator lamp on
the 230 V power socket
is not lit.
The on-board voltage is too low because the battery is too weak.
X Start the engine.
or
X
Charge the battery (
Y
page 349).
If the indicator lamp still does not light up:
X
Visit a qualified specialist workshop.
The temperature of the DC/AC converter is temporarily too high.
X
Remove the electronic device connector from the 230 V socket.
X
Let the DC/AC converter cool down.
If the indicator lamp still does not light up after the converter cools
down:
X
Visit a qualified specialist workshop.
You have connected an electronic device that has a constant nominal
power of less than 150 watts, but has a very high switch-on current.
This device will not work. If you connect such a device, the 230 V
power socket will not supply it with power.
X Connect a suitable electronic device.
Coolbox in the centre console
Important safety notes
G
WARNING
If you cover the ventilation grille for the cool-
box, it may overheat. There is a risk of fire.
Always make sure that the ventilation grille is
not covered.
The coolbox ventilation grille is between the
front seat base and the centre console side wall.
The coolbox can hold a maximum load of 3.5 kg.
If the coolbox is used when the engine is
switched off, the starter battery may discharge.
If the on-board voltage is too low, it might then
no longer be possible to start the engine.
Coolbox in the centre console
323
Stowing and features
Z