Mercedes-Benz V 200 d, Руководство по эксплуатации

Страница: 306 / 404

On the mobile phone
X
Switch on the mobile phone and enter the PIN
when prompted to do so (see the manufac-
turer's operating instructions).
X
Activate Bluetooth
®
and, if necessary, Blue-
tooth
®
visibility for other devices (see the
manufacturer's operating instructions).
This visibility is for restricted periods of time
on some mobile phones (see the manufactur-
er's operating instructions).
X
Set the Bluetooth
®
device name for the
mobile phone if necessary.
The Bluetooth
®
device names for all of one man-
ufacturer's products might be identical. To
make it possible to clearly identify your mobile
phone, change the device name (see the man-
ufacturer's operating instructions).
The battery of the mobile phone should always
be kept sufficiently charged in order to prevent
malfunctions.
i Some displays (e.g. the signal strength)
depend on the supported version of the
Hands-Free Profile.
Specified procedure and general infor-
mation
Searching for and authorising (connect-
ing) a mobile phone
Before using your mobile phone with the multi-
media system for the first time, you will need to
search for the phone (
Y
page 304) and then
authorise it (
Y
page 305). Depending on the
mobile phone, authorisation takes place by
means of Secure Simple Pairing or by entering a
passkey. The multimedia system automatically
makes the procedure that is relevant for your
mobile phone available. You can recognise
Secure Simple Pairing by the fact that a code is
displayed on the mobile phone and on the mul-
timedia system. You can recognise the passkey
system by the fact that you have to enter a code
on the mobile phone and on the multimedia sys-
tem. The mobile phone is always connected
automatically after authorisation.
If the multimedia system does not detect your
mobile phone, this may be due to particular
security settings on your mobile phone. You can
also begin the search procedure and the author-
isation from the mobile phone (
Y
page 305).
Device-specific information on authorisation
and connection of Bluetooth
®
-capable mobile
phones can be obtained online by visiting
http://www.mercedes-benz.com/connect.
You can authorise up to 15 mobile phones. After
authorisation, the connection with the two
phones that were last used functions automati-
cally at all times. Only one mobile phone can be
connected at any one time.
If the mobile phone supports the PBAP (
Phone
Book Access Profile) and MAP (Message
Access Profile) Bluetooth
®
profiles, the follow-
ing information will be transmitted after you
connect:
R
phone book
R
call lists
R
messages
De-authorising a mobile phone (discon-
necting)
The connection is terminated automatically if
you leave the reception range of the multimedia
system or deactivate Bluetooth
®
on your mobile
phone.
If you no longer want the Bluetooth
®
connection
to be automatically established, you must de-
authorise (disconnect) the mobile phone
(
Y
page 306).
Searching for a mobile phone
X Press the
%
button.
X Slide 6 the controller to switch to the menu
bar.
X
Select
Connect device
by turning and press-
ing the controller.
The device list appears.
X
Select
Search for phones
.
A message appears informing you that Blue-
tooth
®
must be activated on the mobile phone
and must be made visible to other devices.
X Select
Start search
by pressing the con-
troller.
The available mobile phones appear in the
device list.
The duration of the search depends on the num-
ber of Bluetooth
®
telephones within range and
their characteristics.
If a new phone is found, it appears in the device
list with the
Ï
symbol. You can authorise
304
Telephone
Multimedia systems