Mendota FV44I Gen 3, Инструкция по сборке, установке и эксплуатации

Страница: 26 / 98

85-03-01060-D FV44i Décor Gen 3 Page 26
3.2.10.7 Surround Outer Edge Finish Options
The outer edge (flange) of a Basix or Faceplate surrounds are offered in various sizes:
1. Flat outer edge: This type of outer edge is only available for rectangle shaped surrounds and uses a double hem bend
edge designed to provide a flat outer edge appearance. The effective outer edge finish depth for the flat surround is
5/16”.
Note: Flat outer edge finish is NOT available for Arch Shapes or other complex shaped Custom Surrounds.
2. 1/2” outer edge: This type of outer edge is available in either rectangle or arched shaped surrounds and any custom
surround.
3. 1- ¾” outer edge: This type of outer edg e is available in either rectangle or arched shaped surrounds and any custom
surround.
4. Outer edge greater than ½” in any size up to 10”: This type outer edge is available for any custom surround.
3.2.10.8 Outer Edge Size vs Fireplace Depth Requirements
The minimum fireplace depth required in the existing wood burning fireplace to fit this Insert into will vary depending on the
outer edge (flange) depth of the surround you select. As the outer edge (flange) depth increases, the minimum depth required to
fit this Insert into will reduce proportionately.
SURROUND OUTER EDGE DEPTH VS MINIMUM DEPTH REQUIREMENTS
OUTER EDGE DEPTH MINIMUM CAVITY DEPTH
REQUIRED
OUTER EDGE DIMENSIONAL IMAGE
FLAT (5/16”)
**AVAILABLE ON CUSTOM OPTION
2 FINISH BASIX SURROUNDS IF
FIREPLACE OPENING WIDTH IS AT
LEAST 35”.
**NOT AVAILBLE ON ARCHED BASIX
OR FACEPLATE SURROUNDS.
17- 3/4”
1/2"
**AVAILABLE ON CUSTOM OPTION
2 FINISH BASIX SURROUNDS IF
FIREPLACE OPENING WIDTH IS AT
LEAST 35”.
17-1/2 ”
1-3/4 ”
”
16”
Table 3.2.10-3 SURROUND OUTER EDGE DEPTH vs MINIMUM FIREPLACE DEPTH REQUIREMENT