background image

D33464 | Date 09/2018  

55

Menu mode

7.8  

 Protocol

The appliance continually logs all relevant measured values, settings and error messages at 

1-minute intervals. The internal  log memory is of the continuous memory type. The logging 

function cannot be switched off and is always active. The measured data are stored in the 

appliance, safe from manipulation. If the  power supply is interrupted, the time of the power 

failure and voltage recovery are stored in the appliance.  
You can export the protocol data for different periods to a USB storage medium  via the USB 

interface or, via Ethernet, import them to the  AtmoCONTROL software for graphical represen-

tation, print-out or storage.

The  log memory of the appliance is not modified or deleted by reading it out.

1.  Connect the USB storage medium to the 

interface on the right side of the control 

panel.

2.  Activate the protocol. To do so, press 

the activation key on the right side of 

the 

PROTOCOL

 display. The display is 

enlarged and the period 

This Month

 au-

tomatically highlighted. To select another 

logging period, use the turn control.

Protocol

  12.10.2012   12:00

control range

3.  Save your selection by pressing the confir-

mation key. The transfer starts and a 

status symbol indicates the progress.

   

This Year
Complete control range

This Month

   

4.  As soon as the transfer is complete, a 

check mark appears in front of the period 

selected. The USB storage medium can 

now be removed.

This Year
Complete control range

This Month

For a description of how to import and process protocol data in  AtmoCONTROL or 

read them out via Ethernet, please observe the separate  AtmoCONTROL manual.

Содержание hpp 1400

































































Отзывы: