D33464 | Date 09/2018
11
Construction and description
2.5.2
Communication interfaces
The interfaces are intended for appliances which meet the requirements of IEC 60950-1.
USB interface
The appliance is fitted by default with a USB
interface in accordance with the USB specifica-
tion. This way, you can
►
transfer software stored on a USB storage
medium to the appliance (see page 53).
►
export protocol logs from the appliance to
a USB storage medium (see page 55).
►
transfer user ID data stored on a USB stor-
age medium to the appliance (see page
56).
The USB port is located on the right side of the ControlCOCKPIT (Fig. 3).
Ethernet interface
Via Ethernet interface, the appliance can be
connected to a network, so that you can trans-
fer programmes created with the
AtmoCONTROL software to the appliance and
read out protocols. The Ethernet interface is
located on the rear of the appliance (Fig. 4).
For identification purposes, each appliance con-
nected must have its own unique IP address.
Setting the IP address is described on page
43 .
You will find a description of how to transfer programmes via Ethernet
in the enclosed AtmoCONTROL manual.
With an optional USB to Ethernet converter, the appliance can be directly connected
to a computer / laptop (see Optional accessories on page 15).
Fig. 3
USB interface
Fig. 4
Ethernet interface
