D33464 | Date 09/2018
17
Delivery, transport and setting up
3.4.3 Disposing of
packaging material
Dispose of the packaging material (cardboard, wood, foil) in accordance with the
applicable disposal regulations for the respective material in your country.
3.5
Storage after delivery
If the appliance is first to be stored after delivery: Read the storage conditions from page
59.
3.6
Setting up
Warning!
Due to its centre of gravity, the appliance can fall over to the front
and injure you or other people. Always attach the appliance to a wall
with the tilt protection (see page 19). If there is not enough space,
do not begin operating the appliance and do not open the doors.
Contact the Memmert service (see page 2).
3.6.1 Preconditions
The appliance may only be installed on the bottom. The installation site must be flat and
horizontal and must be able to reliably bear the weight of the appliance (see Technical data on
page 13). Do not place the appliance on a flammable surface.
A suitable power source (see type plate and technical data on page 13) must be available at
the installation site.
The distance between the wall and the rear of the appliance must be at least 15 cm.
The clearance from the ceiling must not be less than 20 cm and the side clearance from walls
or nearby appliances must not be less than 5 cm (Fig. 8). Sufficient air circulation in the vicinity
of the appliance must be guaranteed at all times.
For appliances with castors, always position and lock the castors facing forwards.
FP
FP
FP
FP
Fig. 8
Minimum clearance from walls and ceiling
