28
D33464 | Date 09/2018
Operation and control
A high level of air humidity in the interior can only be achieved without condensation if the
interior is thoroughly heated. For this reason, how fast the humidity is dynamically adjusted
to approach the setpoint depends on the interior temperature.
5.4.5
Operation with digital backwards counter with target time setting,
adjustable from 1 minute to 99 days ( timer)
In timer operation, you can adjust the time the appliance runs at the set values.
The appliance has to be in manual operating mode for this.
1. Press the activation key to the left of
the timer display. The timer display is
activated.
.5 C
100
Set 1
TIMER
-
Ende 9:00 23.11.
--
h
-
m
2. Turn the turn control until the desired
duration is displayed – in this example 4
hours 30 minutes. The approximate end
time is shown beneath, in a smaller font.
TIMER
End
0
13:30 23.11.
04
m
h
3
Up to a duration of 23 hours 59 minutes, the time is displayed in hh:mm (hours:minutes)
format. For 24 hours and more, the format dd:hh (days:hours) is used. The maximum
duration adjustable is 99 days 00 hours.
3. Press the confirmation key to confirm.
The display now shows the remaining time
in a large font and the approximate end time
in a smaller font beneath. The status display
shows
Timer active
.
TIMER
30
m
04
h
End 13:30 23.11.
Timer active
12.Sept.2012 13:44
4. Now, as described under 5.4.2 , set the individual values which you want the appliance
to operate at. The set values can be changed at any time while the timer elapses. The
changes are effective immediately.
In
Setup
, you can choose if the timer should run setpoint-dependent or not.
This determines whether the timer should not start until a tolerance band around the set
temperature is reached or if it should start right after activation (see page 45). If the
timer runs setpoint-dependent, this is indicated by the
symbol in the timer display.
When the timer expires, the display shows 00h:00m. All functions
(heating etc.) are switched off. In addition, an acoustic alarm
sounds, which can be turned off by pressing the confirmation key.
TIMER
00
m
00
h
End 13:30 23.11.
