Megger PVS 100i, Руководство пользователя

Страница: 7 / 47

7
Device in fully
functional condition
All components of the PVS 100i may only be used if they are in a fully functional state.
In the event of mechanical damage (e.g. crack in the housing) or dirt, the electrical
safety may be compromised. This especially applies to the high voltage sensor, since
damage to it could pose an immediate danger to life and limb.
To prevent any damage, the measuring device and high voltage sensor should be
handled with the utmost care. In case of doubt (e.g. if a part has fallen onto a hard
surface), the respective part should be sent to Megger or an authorised service
department for inspection.
Electromagnetic
radiation
This device is designed for industrial use. When used at home it could cause
interference to other equipment, such as the radio or television.
The interference level from the line complies with the limit curve B (living area), the
radiation level complies with the limit curve A (industrial area). Once the living area is
sufficiently far away from the planned area of operation (industrial area), equipment
there will not be impaired.