Megger PVS 100i, Руководство пользователя

Страница: 19 / 47

19
5.3 Using the Stylus
All entries on the PVS 100i are made on the touch-screen using the stylus. To activate a
touch button, you only need to gently touch it with the tip of the stylus. Always put the
stylus back in its slot after use.
If you have to enter a string of characters (such as a file name) in the system, the
dialogue shown below appears in the display area.
Select OK to finish the entry.
5.4 GSM and GPS Reception
GSM reception To synchronize via call-up over the GSM network, both the base station and the mobile
unit of the PVS 100i must each be equipped with a GSM SIM card. The PIN code
request must be disabled for both SIM cards!
If necessary, the cards must first be
inserted into a mobile phone, with which this function can be deactivated.
Detailed information about installing/replacing SIM cards can be found in chapter 4.
The bar graph labelled
GSM indicates the current GSM signal quality when the device is
turned on.
Under difficult conditions, e.g. within buildings, it may help to unscrew the rod
antenna and connect the external antenna (optional accessories) in its place. This
should then be positioned outside the building if possible, or near windows.
0 1 2 3 4 5 6 7 8 9
Q W E R T Y U I O P
A S D F G H J K L _
Z X C V B N M < >
OK
3
6
Very good reception No reception (or no card)