Megger PVS 100i, Руководство пользователя

Страница: 17 / 47

17
5 General Operation
The PVS 100i has a robust design and has passed all practical and stress tests. It has
also withstood loads that have, in part, considerably exceeded the threshold values
required by the relevant standards.
Nevertheless, the PVS 100i and its system components are electronic measuring devices
which must be handled with due care and attention.
In particular, the display
must not under any circumstances be placed under a large
amount of pressure!
For this reason, all detachable parts, such as e.g. the GPS antenna
, the GSM
antenna and the stylus , must be attached to the correct place and the GSM
antenna must be placed horizontally by hand before the housing lid is closed.
Noncompliance can lead to damage to the device for which Megger offers no warranty.
5.1 Switching On and Off
Normal
switching on/off
The device can be turned on by briefly pressing the on/off button . The LED lights up
green when the device is on. Immediately after being turned on, the display shows the
quick selection menu with the stored measurement profiles:
If the GPS power reserve is not yet sufficiently charged or the GSM reception quality does
not provide reliable communication with the base (no bars or 1 bar), the individual
measurement profiles cannot be selected and, accordingly, the measurement cannot be
started.
In such a case, suitable measures must be taken to improve the GPS/GSM reception (see
Section 5.4).
CAUTION
6
3 6
8
7
GSM
GPS
LVUK.MSL
LV
LVWPD.MSL
LV
TEST.MSL
LV
LV1.MSL
LV
CAP1.MSC
CAP
CAP2.MSC
CAP
HV11.MSH
HV
Configuration
PVS
2