Megger MTO210, Инструкция по эксплуатации

Страница: 11 / 74

Getting to Know the MTO210
AVTMTO210 Rev 7 Sept 2013
3
Top Panel Controls
Figure 1: MTO210 Front Panel
Input AC Power Module:
This module is an IEC320 interface to the mains power. The module has an
integrated switch, fuse holder and input filter module. Above the module are the
voltage, frequency and power requirements for the product. Below the module are
the fuse type and ratings based on the input voltage used. The green light on the
right side of the module illuminates when power is ON.
0, OFF position
- , ON position
Output Current Terminals
These connections are used to connect to the transformer winding(s) and pass the
DC power into the transformer winding for testing and demagnetization. The
connection is capable of supplying up to 50 volts DC and up to 10 amps current.