View on device – Chapter 3
8
3.3 How to set up the AlphaTrainer to connect to a CD-player / to run the special FLIC
language training.
Connect this plug into
the headphones jack
headset-phone of the CD
player put
Here put the client microphone in (to it
the screwed on adapter remove)
Audio connection
fi
eld of the computer
(usually back)
This plug into the
microphone socket of
the computer put.
This plug into the jack
headset-phone of the
computer put.
into
ack
e CD
3.2 Back view of the AlphaTrainer
Attach the components necessary for training (headphone, microphones, CD player, shutter glasses) to the
AlphaTrainer. Make sure that headphones and microphones in particular are allocated correctly to client(s)
and trainer.
Attention! In order to avoid dangers, technical problems and disfunctions during the employment
of the AlphaTrainer, it is very important that you ensure that all accessories are con-
nected to the correct sockets.
LCD shutter glasses
Power supply
Headphones for the coach
Headphones for the client
Microphone for the client
(as needed: Connection of the AlphaTrainer special microphone cable
Microphone for the coach
Computer (USB-cable)
Line IN MP3-Player / USB-Stick
(training material)
Line IN-cableel, e.g. CD-Player
(training
material)
or computer
(=sound source)
Line OUT
(for recording device)
On / off switch
Please note:
If you wish to record auditory information, use the LINE IN cable (the same or an additional one). Plug the
cable into the LineOut socket of the AlphaTrainer and the plug with a green mark into the recording device.
