Operation – Chapter 4
26
Enter client respectively
edit client:
All menu commands are identical for trainer administration. Only the symbols on the display are different.
Hence the descriptions from this manual for client administration also apply to administrating trainers with
the AlphaTrainer.
You are in the client data overview
* mandatory
Input of the surname ... *
1. Press T1 to switch to the entry mode for the surname.
2. Press one of the T1 thru T7 keys in order to enter the
fi
rst letter of
your client’s last name. You may have to press the corresponding
button up to four times depending on the letter. The currently selected
letter is highlighted in the display. In this example the letter “t” is pre-
selected.
3. Repeat this procedure until the last name is complete.
4. Press T14 to return to the data overview. The last name is now on
display.
Please note:
Even when de
fi
ning a client group rather than an individual client, please ensure to com-
plete the entry for
fi
rst name, date of birth and gender. This is mandatory in order to be able to
process data in and with MediTOOLs
Further advice for editing client data:
•
If you mistyped, you can move the cursor under the mistyped letter by pressing the T16 key
once or multiple times. Now simply replace the incorrect letter and return to where you wish to
continue the client entry using the T13 or T16 key.
•
If there is an additional letter you wish to erase at the end of the name, move the cursor under
that letter and select a spacebar (press T8 once). This will erase that letter.
Continue with the
fi
rst name ... *
5. Press T2 to switch to the corresponding submenu.
6. Repeat steps 2 through 4 which you already applied when entering the surname.
7. Press T14 to save the
fi
rst name and return to the client data overview. The
fi
rst name is now visible
in the display.
T1
T2
T3
T4
T5
T6
T7
T8
T9
T10
T11
T12
T13
T14
T15
T16
x
x
xx
xx
Data overview
Level: Insert names
Menu: Personal data management
