20
5.
Operationun
5.1. Channel
selection
To select a channel, either press one of the
P -/+
buttons on the remote control, use the multifunction button
MODE
on the device or select the channel directly using the number buttons.
Use the
(SWAP)
button to select the last channel played.
By pressing the
OK
button on the remote control you can call up the channel list, select the channel with the
and
buttons and confirm with
OK
.
5.2.
Sound
settings
Use the
V-/+
volume buttons on the remote control or increase or decrease the volume in the volume mode of the
MODE
switch on the device.
Use the
Stummschaltung button to switch the volume fully off and on again.
Pressing the
LANG
button will display the current audio language.
5.3. Screen settings
Depending on the programme, the pictures are transmitted in the formats 4:3 or 16:9. Use the
(SIZE)
button to
adjust the picture format:
AUTO
: The format displayed is automatically adjusted to match the input signal.
FULL:
(only in HDMI mode and for HDTV programmes received via
cable or satellite): Pixel-exact reproduction of the image (1:1).
16:9
: For undistorted screen display in 16:9 format.
SUBTITLE
: With this function, a widescreen image (picture format
16:9) with subtitles is zoomed to full screen size.
SUBTITLE
SUBTITLE
14:9
: This option sets the 14:9 picture format.
14:9 ZOOM
: With this function, a wide image (picture format
14:9) is zoomed to the upper and lower edges of the screen.
4:3
: Is used to view a standard image (picture format 4:3) as this is
its original format.
CINEMA
: With this function, a widescreen image (picture format
16:9) is zoomed to full screen size.
