Medion P18072, Инструкция по эксплуатации

Страница: 81 / 124

18
4.7.2. Cable
Network channel scan - Digital Cable
Start Frequency
Stop Frequency
Search Step
Continue
Change Value
OK
Back
BACK
114.00 MHz
858.00 MHz
8000
Exit MENU
If you have previously activated the reception type
DIGITAL CABLE
, you can now make settings for the network
search. If it should be necessary, you can adjust the
START FREQUENCY
, the
STOP FREQUENCY
and the
SEARCH STEP
correspondingly.
4.7.3. Satellite
First time installation
Direct
Continue
OK
Antenna type
If you have a single receiver and a direct satellite dish,
select this antenna type.
Choose antenna type
Back
BACK
If you have previously activated the reception type
SATELLITE
, you can now make settings for the antenna type.

To set the antenna type, select one of the following antenna types:
− DIRECT
: Select this antenna type if you have a single receiver and a satellite antenna. Press the
OK
button and
then choose the desired satellite (you can also call up the transponder list using the blue button ). Afterwards,
press the
OK
button again to start the search. After that, decide whether or not the channellist should be load-
ed.
− SINGLE SATELLITE CABLE : Select this antenna type if you have multiple receivers and a single-cable sys-
tem. Press the
OK
button and make all the necessary settings regarding SATELLITE POSITION 1/2 ,
USER BAND and BAND FREQUENCY (here you can also call up the transponder list using the blue but-
ton ). Afterwards, press the
OK
button again to start the search. After that, decide whether or not the channellist
should be loaded.
− DISEQC SWITCH
: Select this antenna type if you have multiple satellite antennas and a DiSEqC switch. Press
the
OK
button and activate the desired
DISEQC
switch
1–4
(here you can also call up the corresponding
transponder list using the blue button ). Afterwards, press the
OK
button again to start the search. After that,
decide whether or not the channellist should be loaded.

Afterwards, press
OK
to continue.