37
EN
Menu Item
Settings
TIMER TYPE
In the
TIMER
menu you can enter the beginning and the end times of a
programme you do not want to miss. Proceed as follows:
Press the yellow button to enter a programme time in the timer, or the
green button to adjust the settings for an existing programme.
The timer function can be used to switch over to another channel at a
particular time (with the device switched on). If the device is in standby
mode, the analogue sound and image signals will be played back via the
mini-SCART connection at the set time. The device does not switch on.
Thus, a programme can be recorded with a video recorder, for example,
with the TV in standby mode. In this case, the LED on the front of the de-
vice flashes.
CHANNEL
Select the channel.
RECORD TYPE
This is preset and cannot be changed.
DATE
Enter the date.
Use the number buttons to change digits in the square brackets.
START
Enter the start time.
END
Enter the end time.
DURATION
The duration is determined automatically.
REPEAT
Select the intervals at which the timer is to be repeated.
CHANGE/
DELETE
If
DISALLOWED
is selected, a lock icon appears. In this case, you can
only open the entry with the PIN.
DATE/TIME
Here you can change the time settings.
DATE/TIME
: Display the set date and time. The entries cannot be changed.
TIME SETTINGS MODE
: If you change the setting from
AUTO
to
MANUAL
, you can, in
terms of full hours, adjust the selected time zone forwards or backwards.
GMT
: Only active if the previous point has been set to Manuell
.
Select the value with
. The current time will be changed accordingly.
SOURCES
In this menu you can activate/deactivate or select sources. Deactivate a source by selecting it
and pressing
. Deactivated sources do not appear in the pick list that opens when you press
the
(SOURCE)
button.
If you want to rename a source, press the
red button
. Afterwards, you can then change the
name using the direction buttons
.
