45
6
The following chart shows the objects that belong to general
setting:
Number
32
33
1 bit
1 bit
[Central Function]
All Relays On/Off
[Central Function]
All Relays On/Off
(Status)
Name
Length
Usage
This object is use to
switch all relays on/off.
Note: This object is only
valid when the
parameter “All Relays
On/Off” is checked.
Sends the on/off status
for the relays
.
1: all of the relays are off.
0: one of the relays is on.
6
5 1
–
.1.1. . General setting - RELAY CONTROL Relay
Once a relay is activated, a new page of Relays will appear. At
this subpage, the further parameterization can be done.
The
following illustration shows the setting options at the
submenu for a relay.
46
6
The chart shows the dynamic range for this parameter:
ETS-text
Output mode
On delay
Off delay
Central function
Send status
Send status cyclic
(0= not active)
Additional
inverted status
Behavior at
locking
Behavior at
unlocking
●
normally opened
normally closed
●
normally opened
0 – 65535s
[0s]
0 – 65535s
[0s]
●
Unchecked
●
Checked
●
no send, passive
status object
●
at change
●
always at input
of telegram
at change
0 – 65535s
[0s]
●
Unchecked
●
Checked
Unchecked
●
off
●
on
●
no change
no change
●
off
●
on
●
no change
●
previous status
no change
Dynamic range
[
]
default value
[
]
default value
Comment
Defines the default
behavior of the relay.
Adjustment of the time at
which the switch-on
process shall be delayed.
Adjustment of the time at
which the switch-off
process shall be delayed.
Whether it is controllable
via the object [Central
Function] All Relays On/Off.
Sends status signals from
the object All Relays
On/Off with the option you
selected.
Sends status signals from
the object All Relays
On/Off at intervals you
desire.
If actives, inverter signals
received from the object
On/Off(Inverted Status),
that is 1→0; 0→1.
Sets the action to be
performed when a lock
order is received.
Sets the action to be
performed when an unlock
order is received.
