9
Type
AC and relay terminals
L,N,K1,K2,K3,K4
DALI terminals
(DALI-A, DALI-B)
KNX bus terminal
(KNX)
Solid wire
Stranded
wire
American
wire gauge
Wire stripping
h
lengt
Screwdriver
Recommended
tightening
torque
0.5 ~ 4.0mm
0.5 ~ .
mm
1 45
0.6~0.8Φ
0.5 ~ 2.5mm²
------
0.5 ~ .5mm²
1
12 ~ 26AWG
1 ~ 26AWG
6
20 ~ 22AWG
7 ~ 8mm
(0.276
0.315
" ~
")
7 ~ 8mm
(0.276
0.315
" ~
")
5mm (0.196")
3mm Slotted
3mm Slotted
------
5 kgf-cm (4.4 lb-in)
5 kgf-cm (4.4 lb-in)
------
3 4
. Wiring
3 5
.
ETS App (DCA)
l
Use wires with an adequate cross-section.
l
Use suitable mounting tools to do the wiring.
NOTE: To install the DCA app, ETS license is needed
The application for the gateway is based on the standard surface for
the configuration of communication objects and parameters as well
as a special surface for configuring the DALI bus system. This special
surface is designed as a DCA (Device Control App) for the ETS5.
All required program data are automatically created when the App is
imported.
Therefore click on Button “App“ in the footer of ETS5 and then the
“plus“ sign in order to add an ETS App to your ETS5 system:
3
10
A file box will become visible to select the ETS App for the gateway
.
This etsapp file can be downloaded from the official Mean Well
website or link below:
The App is displayed in the list of all ETS5 Apps:
When the product is selected an additional DCA tab is shown.
https://building.meanwell.com/Upload/PDF/KNX_Application%20Database.pdf
3
