71
6
Dynamic range
[
]
default value
[
]
default value
ETS-text
Comment
Sends status signals from
the object in seconds or in
hours.
Sets the life span
(operating hours limit) of
the ECG after which an
individual alarm is sent.
Sends status signals from
the object Operation Value
at intervals you desire.
Select data type
Operation hours
limit
Send status every
(0=no active)
●
4 Byte value in
second
● 2 Byte value in
hour
4 Byte value in
second
1 – 65535hrs
[10000hrs]
0 – 255hrs
[0hr]
The following chart shows the objects that belong to general
setting:
Number
43
44
1 bit
4 bytes
2 bytes
[A:ECG 1]
Operation
Hours Reset
[A:ECG 1]
Operation
Hours
Value (in seconds)
[A:ECG 1]
Operation
Hours
Value (in seconds)
Name
Length
Usage
Resets the operating
hours counter of the ECG.
The operating hours of
the ECG in seconds are
sent via this object. The
internal counter can be
set to 0 (Reset) or
another value via this
object.
The operating hours of
the ECG in hours are sent
via this object. The
internal counter can be
set to 0 (Reset) or
another value via this
object.
72
6
Number
Name
Length
Usage
45
1 bit
[A:ECG 1]
Operation
Hours Exeeded
This object is used to
report that the operation
hours' counter exceeds
the set threshold.
A:Groups enable and B:Groups enable pages are used to activates
group functions.
Use this parameter to
activate the function.
X:Group n
X = A or B
n = [1, 16]
●
Unchecked
●
Checked
Unchecked
Dynamic range
[
]
default value
[
]
default value
The chart shows the dynamic range for this parameter:
Once a group is activated, a new page of A:Groups or B:Groups will
appear. At this subpage, the further parameterization can be done.
Detailed information is described in the following sections of NAME,
FAILURE&COVERY, DIMMING CURVE, SWITCH, DIMMING, STATUS,
LOCK and FUNCTIONS.
ETS-text
Comment
6 3
. Groups enable
