Meanwell DLC-02-KN, Руководство по установке

Страница: 23 / 50

39
6
6 1 .1. General setting
There are SYSTEM, KNX FAILURE, AFTER MODE, BROADCAST,
RELAY CONTROL and RCT in the page
6.1.1.1 General setting - SYSTEM
40
6
The chart shows the dynamic range for this parameter:
The following chart shows the objects that belong to general
setting:
ETS-text
Number
Startup timeout
31 1 bit
Send operation “ ”
cyclic
(0= not active)
2 60s –
[2s]
[Central Function]
Operation
0 65535mins –
[0mins]
Dynamic range
[default value]
Name Length
Comment
Usage
All functions run after
startup timeout finished.
NOTE: The timeout starts
counting when power-on
initialization is done. So it
always takes longer than
you expected.
This object is use to
send status of the
device to the system at
regular intervals when
active.
Sends status signals from
the object Operation at
intervals you desire.
6 2 .1.1. General setting - KNX FAILURE